420 Clamp-on Ultrasonic Flow Meter；420 Clamp-on Ultrasonic Flow Meter, Clamp-on Flow Meter, Portable Ultrasonic Flow Meter, 4-20mA Flow Meter, Non-invasive Flow Meter

Product Introduction

HYLS series Clamp-on Ultrasonic Flow Meter adopts new type of external clamp design, which can obtain the flow contacting the measured medium. Due to the advantages of the clamp-on flow meter, it is not necessary to cut off the pipeline or stop the equipment for a long time, saving cost and labor cost. The ultrasonic flow meter is simple and quick to install and operate, and the flow and energy can be monitored.

Product Advantages:

Compared other traditional flow meters, the clamp-on ultrasonic flow meter is specially designed for small pipeline size clamp-on flow measurement. It is integrated with the monitor LCD and sensor and the user can directly read the flow from the device. The ultrasonic flow meter has a variety of outputs such as 4-20mA, OCT pulse and485 modbus, which can achieve remote monitoring in the central control room.

Technical parameters

Size DN15-DN40 (1/2”- 1 1/2”)

Accuracy±1% of the measured value

Flow range ±0.1m/s ~ ±5m/s

Fluid Single medium liquid Pipe materialMetal / Rigid plastic pipe PVC, PP or PVDF

Power supply 10-24V DC Electricity < 3W

Data period 300 milliseconds

Data backup memory EEPROM(Data retention: over 10 years, Data read/write frequency: over 1 million) Protection circuit Power reverse protection, power surge protection Output short circuit protection, output surge protection

Output 4-20mA, OCT(optional)

Communication RS485 Power and IO connection M12 aviation plug

Medium temperature Standard type: 0-75℃

Hum 35 to 85% RH (no condensation)

Vibration resistance 10~55Hz Double amplitude 1.5 mm,2 hours XYZ axis

Ambient temperature -10 to 60°C (no freezing)

Protection IP65

Main components Aluminum industrial plastic

Cable length Signal line 2m (standard) PT1000 sensor standard cable length 9m

industrial process monitoring - temporary or permanent monitoring of cooling water, circulating water, and process water.

HVAC system - measures water flow in heating and cooling systems.

Agricultural irrigation metering - rapid measurement of flow in main or branch canals.

Energy audit and energy-saving diagnosis - measuring the energy consumption of key equipment and identifying energy-saving potential.

Environmental monitoring and emission measurement - compliance monitoring of wastewater and sewage discharge.